About Us | How We Work
home Pricing Samples Testimonials Case Studies

Product Development Services for a UAE Manufacturer

Case Study on Product Development for UAE Manufacturer

An independent client based out of the UAE approached Outsource2india (O2I) to assist with product development and design for manufacturing of a new product.

The Client

The client approached the team with a specific product they wanted to develop and prepare for manufacturing. They needed -

  • A partner who could assist with the development of a coffee vending machine dispensing large quantities of coffee (1.5 liters) in a single press
  • This new product would be different from most in the market because many are limited to brewing only a single cup of coffee at a time
  • The development process for this new product needed to be completed in just three months
  • The client needed a partner who had specific expertise in product development within a specific time frame

Project Challenges

During the project, the team at Outsource2india faced several problems that had to be addressed before completion. These included -

  • The client had limited knowledge about the technical specifications of the product they had to develop. Thus, the engineering team at O2I had to perform extensive research on material selection, standards to be followed, etc. before the process could start
  • The team also had to complete a feasibility study to ensure the materials used for manufacturing would meet the standards of the country in which the product would eventually launch
  • The research and development process took nearly two months, severely impacting turnaround time for the project

The Solution

To ensure that the project was completed on time despite the challenges posed by the research process and that too as per the specifications provided by the client, the O2I team took the following steps -

  • An in-depth discussion was held with the client to ensure complete understanding of what the product needed to be
  • Four resources were assigned to work exclusively on this project
  • Thorough research was performed on standard food-grade materials to be used for manufacturing a product in UAE
  • A conceptual design was prepared and shared with the client for feedback
  • The team then discussed the product's mechanisms with the client and worked on a model to determine how the finished good would look
  • Once prepared, the O2I team provided manufacturing and production drawings to the client in 2D and 3D formats. Modeling was performed in SolidWorks and production drawings in AutoCAD
  • The final model was delivered to the client as a PPT presentation via Dropbox

The Results

Because of the additional efforts taken by the Outsource2india team, the project was completed to the specific needs and budget of the client. They were then able to successfully manufacture the product, matching the manufacturing standards of UAE.

The client was highly satisfied with the end results and has since indicated he will assign more projects in the future. To learn more about our mechanical engineering capabilities and product development and engineering services from Outsource2india, contact us today.

Contact Us


Decide in 24 hours whether outsourcing will work for you.

We respect your privacy. Our Policy.

Have specific requirements? Email us at: engineering.info@outsource2india.com

CAD Conversion 2D Drafting 3D Modeling
  • O2I's Mechanical Engineering team functioned as an extended team for an oil & gas company. We helped them complete the project in record time, resulting in substantial time and cost savings.
  • Our FEA Services team has successfully completed FE Analysis and assisted in validation and certification of equipment used in offshore applications.
  • O2I's Mechanical Engineering team is involved in updating the current database of drawings in different CAD platforms and converting the same to a common CAD platform for a client.
  • O2I's Mechanical Engineering team is working on creation of 2D CAD drawings for a large European food and beverage industry.
  • We are providing Virtual Assistant services for Engineers and Consultants, supporting the in-house Engineering team in gathering Engineering Data for a large mass lift company.
  • Our Engineering team is providing tool design assistance to a large shipping company.
  • We are assisting a precision component manufacturer to convert large volumes of hand sketches to editable CAD files.
  • Our Mechanical Engineering team is assisting a food and beverage company with re-engineering existing machinery and finding better design alternatives.
  • The Mechanical 3D Product Animation team provided a scope break-up for 180 seconds of animation for an engineering consultancy & contracting company.
  • Our CAD services team is providing design and documentation solution to a large precision component manufacturer in the Europe.
  • Our Engineering team is currently executing a Reverse Engineering project for high precision components at our facilities.
  • The Engineering team is involved in concept design of mass lifting components for a large shipping company.
  • Our Mechanical Engineers completed a CAD conversion project for a large consulting firm in record time while also ensuring the highest quality.
  • Our Engineers and styling experts are working on providing assistance to our client in restoring vintage vehicles.
  • The Mechanical Engineering team is updating 3D models and conversion of the same models to different modeling platforms for an F&B company.
  • Our team is helping an automotive company to customize product display of automotive components.
  • The Engineering team at O2I is executing concept design of equipment used in the agricultural industries.
  • We are assisting a large aerospace company in converting a large number of hand sketches to CAD drawings.

Our Clients

  • Alcon
  • Redwood E-Learning Systems
    Yale School of Management
  • Loomis
    Data Infinity
    Auto MiddleEast
  • Camnet
  • Eraid
    Financial Planning Association of Australia
  • International Career Institute
    Carole Holding
View all customers

Join the growth phase at Flatworld Solutions as a Partner

Service distributorship and Marketing partner roles are available in select countries. If you have a local sales team or are a person of influence in key areas of outsourcing, it’s time to engage fruitfully to ensure long term financial benefits. Currently business partnerships are open for Photo Editing, Graphic Design, Desktop Publishing, 2D and 3D Animation, Video Editing, CAD Engineering Design and Virtual Walkthroughs.

Reach out to us for a quick direct response from decision makers at the Flatworld Solutions global team.

Contact us for more information

Key Differentiators Key Differentiators

Case Studies Case Studies

Starts @

Avail best-in-class services at affordable rates

More pricing details
Our Samples


Decide in 24 hours whether outsourcing will work for you.

We respect your privacy. Our Policy.

Have specific requirements? Email us at: mechanical.info@outsource2india.com

Flatworld Solutions Address


No.6, Banaswadi Main Road, Dodda Banaswadi, Bangalore - 560 043

Corporate Court, #15, Infantry Road,
Bangalore - 560 001


Aeon Towers, J.P. Laurel Avenue, Bajada, Davao 8000


116 Village Blvd, Suite 200, Princeton, NJ 08540